Category Archives: Glass

Sliding Glass Door Latch Resources

HK Disney's Hollywood Hotel Cafe sunshine glas...
Image via Wikipedia

Glass doors enable you to appreciate the view outside from your house. They bear similarly to a window in that aspect. Moreover, they is often employed as functional doors or in the bathrooms for enjoying a shower. These doors are ideal for the house offered they’re kept safe. Generally, safety is observed to be an situation with most of these doors; even so generating them safer need to have not be a complex problem.

Although these doors are fitted with sliding glass door locks, they aren’t usually identified to be most suitable for the doors. Also, in most homes, glass doors are arranged on the back, patio or side portions of the house, making the security of the household a huge concern.

When it comes to security and safety sliding glass door locks are not exactly probably the most heavy duty and impenetrable force on the planet. The entire purpose of having sliding doors is so that you may have both a stunning view to the outside too as the inside of your home, and do not forget that they need to be straightforward to open and close too. Investing in top quality sliding glass door locks is the least you’ll be able to do to make sure which you have the very best of each worlds in style and safety.

If you use low-quality sliding glass door locks, it would be easy for burglars to break them open and enter your house because they can do the task without generating much noise, thereby leaving you unaware of their presence within the house. This issue is usually dealt with by utilizing excellent and high-quality locks for glass doors. These doors tend to be strong.

Installed sliding doors of glass with handles in your interior may not trigger security problems; these doors will also have locks which need a replacement only if found needed since the location of these doors is inside your home and not outside it. Some persons get substitution bars which is often extended along the complete sliding door stretch. The supplies applied in the preparation of these bars are reinforced metals of high strength and duration.

Almost any person that has previously owned or currently owns glass sliding doors can relate to the encounter of faulty locks that either jam, or simply don’t lock at all.

Sliding glass door lock repair sad to say isn’t everybody’s cup of tea as the mechanisms are rather complicated and would need the expertise of an experienced locksmith or handyman to install or replace them with new ones. Depending on the kind of sliding door locks that you use it can be doable to DIY it should you have standard understanding of this stuff.

Sliding glass interior doors on the other hand are not so a lot of a security concern and thus do not even have to have heavy locks. These doors mostly serve the purpose of appearing stylish at the same time as generating an air of space and flowing power in the house. Sliding glass interior doors are consequently strictly aesthetic and made to compliment your dwelling so extended as they remain functional.

Sliding glass door locks very simply fall into two categories namely:

I could suggest that you learn more additional research dealing with Sliding Glass Door Latch and also Sliding Glass Door Replacement.

Arranging Glass

arranging glass

arranging glass

A collection of glass – plain or fancy – deserves attractive display to bring out its sparkle.
The most characteristic aspect of glass is that light passes through it, so make the most of this fact when creating a display.
A selection of vases, with or without flowers, enlivens a windowsill as it catches the light.
Glass on glass gives an almost unreal sense of fragile objects floating on air; even the most mundane things take on a special aura.
Glass or mirror-topped tables are perfect for this type of display. Choose all one type of object for maximum impact – a collection of drinking glasses, some glass animals or a group of bottles for example.
To make the most of glass at night, you will need to light it well. Lighting from above or below is the best choice. This could take the form of a downlighter mounted in the ceiling or incorporated into a built-in display unit.
As glass is transparent, a little light goes a long way. Providing the shelves as well as the displayed objects are glass, a single light is sufficient.
A ceiling-mounted down lighter can be focused to bring a table display to life. Alternatively, an inexpensive, freestanding up lighter is an effective way to light a glass-topped side table but make sure it is positioned so as not to dazzle the occupants of the room.
Finally, remember that glass shows every speck of dirt and must be kept sparkling clean to remain looking good.

Delamination Issues with Laminated Glass

Delamination issues with laminated glass made using PVB interlayers fall into two main categories:

  • Sunburst Delaminations

Sunburst delaminations, in some projects have undoubtedly caused concern in the glazing industry. This type of delamination is generally the result of poor manufacturing processes, which impart stresses at locations at the edges of laminated glass, often combined with thinning of the PVB. Optical distortion is also normally evident at these locations.
The most common cause of this type of localized delamination is the use of clamping devices on the edges of laminated tempered glass during the autoclaving of the laminated glass.
While the quality of the glass may appear to be satisfactory at time of dispatch of the glass from the factory gradual release over time of the stresses imparted to the glass at the locations that were clamped may result in ‘sunburst’ delaminations.
As detailed by Jorma Vitkala in his Glass Processing Days 1999 paper, ‘Low-E Tempering – The Latest Results’ with laminated tempered or heat strengthened glass special attention needs to paid to the glass quality in relation to flatness and edge-curving. “If any glass is heated unevenly in the tempering process there is a tendency for the edges of the glass to curl and this is especially the case with pyrolytic Low-E coated glass”.
Laminated glass for point fixed applications such as canopies or frameless facade glazing requires special processing to prevent thinning of PVB around the holes in the corners of the laminates.
Unless precautions are taken thinning of the PVB around holes may occur due to PVB flow in the autoclave process. Such thinning may result in the formation of bubbles or delamination around the holes following installation of the glass.

  • Edge Delamination

edge delaminationEdge stability is defined as the laminate’s resistance over time to form defects along the edge. Unfortunately projects in which edge delamination of around 12 mm has been observed have raised concern with some architects and specifiers about the edge stability of laminated glass in general. On the other hand there are many installations of laminated glass containing B14 PVB interlayer having exposed edges and silicone butt-joined edges that exhibit zero edge defects or only a few minor edge defects many years after installation. This is exemplified, for example in the five-year old Melbourne, Australia residence. More than 350 m² of 12.76 mm floorto-ceiling laminated glass containing B14 PVB is used throughout the home for aesthetics, safety, security, energy efficiency and sound reduction. Neither the silicone butt-joined edges or exposed edges of the laminated glass exhibit any edge delamination.

Sourge by: Mr. Phillip Davies, DuPont (Australia) Limited

Incoming search terms:

  • sunburst delamination
  • sunburst delamination laminated glass
  • delamination issues with laminated glass
  • delamination on laminated glass
  • bubbles on the laminated glass
  • delamination laminated glass
  • laminated glass delamination after installation
  • sunburst delamination causes
  • sunburst delamination of laminated glass

Skylights

skylight at KLBuilt into the roof of a structure a flat, sloped, dome or pyramid shaped skylight offers natural daylight and energy management for any type of space. As a spandrel glass, it is usually produced by a fired-on frit process but with some design pattern.

Spandrel glass

spandrell glass

Spandrel glass is typically specified for buildings’ non-vision areas to mask construction materials from being viewed from the exterior of the building.

Spandrel glass is usually produced by a fired-on frit process in which a ceramic frit is applied to annealed glass and then tempered to fuse the frit with the glass. The result is a non-vision glass panel that does not fade. This glass can also be insulatd to incresae its thermal performance.

Incoming search terms:

  • spandrel glass
  • spandrel glass in china