Category Archives: Iron Mongeries

Sliding Glass Door Latch Resources

HK Disney's Hollywood Hotel Cafe sunshine glas...
Image via Wikipedia

Glass doors enable you to appreciate the view outside from your house. They bear similarly to a window in that aspect. Moreover, they is often employed as functional doors or in the bathrooms for enjoying a shower. These doors are ideal for the house offered they’re kept safe. Generally, safety is observed to be an situation with most of these doors; even so generating them safer need to have not be a complex problem.

Although these doors are fitted with sliding glass door locks, they aren’t usually identified to be most suitable for the doors. Also, in most homes, glass doors are arranged on the back, patio or side portions of the house, making the security of the household a huge concern.

When it comes to security and safety sliding glass door locks are not exactly probably the most heavy duty and impenetrable force on the planet. The entire purpose of having sliding doors is so that you may have both a stunning view to the outside too as the inside of your home, and do not forget that they need to be straightforward to open and close too. Investing in top quality sliding glass door locks is the least you’ll be able to do to make sure which you have the very best of each worlds in style and safety.

If you use low-quality sliding glass door locks, it would be easy for burglars to break them open and enter your house because they can do the task without generating much noise, thereby leaving you unaware of their presence within the house. This issue is usually dealt with by utilizing excellent and high-quality locks for glass doors. These doors tend to be strong.

Installed sliding doors of glass with handles in your interior may not trigger security problems; these doors will also have locks which need a replacement only if found needed since the location of these doors is inside your home and not outside it. Some persons get substitution bars which is often extended along the complete sliding door stretch. The supplies applied in the preparation of these bars are reinforced metals of high strength and duration.

Almost any person that has previously owned or currently owns glass sliding doors can relate to the encounter of faulty locks that either jam, or simply don’t lock at all.

Sliding glass door lock repair sad to say isn’t everybody’s cup of tea as the mechanisms are rather complicated and would need the expertise of an experienced locksmith or handyman to install or replace them with new ones. Depending on the kind of sliding door locks that you use it can be doable to DIY it should you have standard understanding of this stuff.

Sliding glass interior doors on the other hand are not so a lot of a security concern and thus do not even have to have heavy locks. These doors mostly serve the purpose of appearing stylish at the same time as generating an air of space and flowing power in the house. Sliding glass interior doors are consequently strictly aesthetic and made to compliment your dwelling so extended as they remain functional.

Sliding glass door locks very simply fall into two categories namely:

I could suggest that you learn more additional research dealing with Sliding Glass Door Latch and also Sliding Glass Door Replacement.

Patch Fitting for Frame-less Glass Door

The two part iron hinge
Image via Wikipedia

There are some kind of door hardware need to be installed even in the floor for the floor hinges, in the glass door itself and also in the opening frame.

The floor hinges and patch fitting act as pivot, they working together in order to open and close. It will be automatically closed when it being open not more than 80 degree or it will be stop ( opened ) at 90 degree.

This is the hardware code from Dorma product, you can find it in their website, also the information about glass template to fixed up the patch fitting.
There are the kind of hardware for the common used :

  • Floor Hinges : BTS-75, BTS-80 + cover plate
  • Patch Fitting : PT20, PT10, PT21, PT24, PT30, PT40, PT41 L/R
  • Lockset : US10 + cylinder
  • Pull Handle : variable

If you want to install the 10-12mm frame less glass, you have to determine first about the Opening. The Opening with Wood, Brick, Marble or met with another glass have a difference patch-fitting. As describe at the picture below :

Note :

  • Wood/Marble Framed : PT21
  • Alumunium Framed : PT24
  • Glass at Above : PT30
  • Glass at Side and Above : PT40
  • Glass at Side and Above with Rib Glass : PT41R/L

The Rib Glass :
The meaning is the the same with it named as a rib, it usefull for fixed the high frameless curtain wall. If another patch fitting only have 2D (XY) form, it have 3D (XYZ) form.

Looking for suitable Patch Fitting for your Glass Door ? Click Patch Fitting – Fadia Home


Incoming search terms:

  • dorma PT21
  • dorma PT40
  • dorma patch fitting template
  • DORMA PT10 DWG
  • frameless glass door fitting
  • glass l patch fittings template
  • glass patch fittings pt30
  • patch fitting
  • pt10 patch fittings
  • PT10 PATCH TEMPLATE

Keying Systems

There are many types of keying systems. You can combine types to meet your specific requirements.

  1. Change Key ( CK ) ; Each Individual lock has its own individual key, and there is no master key ( MK )
  2. Keyed-Alike ( KA ) ; A system wherein a number of locks have the same cylinder construction ( key number ), and each individual key that operates one of the locks can operate all of the locks.
  3. Master Keying ( MK ) ; A system where in several different looks are combined in one group, and one key ( the ‘master key’) can open all them.
  4. Grandmaster-Keying ( GMK ) ; A system wherein one key ( the ‘grandmaster key’ ) can operated several different groups of master-keyed locks.
  5. Great-Grandmaster-Keying ( GGMK ); A system wherein one key ( the ‘great-grandmaster key’ ) can operated several different groups of grand-master-keying system.
  6. Common Keying System ( RMK ) ; Each key can individually open its own lock. However, it can also operated one or more other locks.
  7. Multi-Master-Keying ( MMK ) ; A system wherein the master keys of several different groups of master-keying system and all the individual keys therein can operate the lock(s) of a designated location The master key and individual keys are called ‘multy-master-keying’ and the designated locks are called ‘multi-master keyed’.
  8. Construction Keying System ( CNK ) ; After completing construction, the conractor gives a new key to the owner or his tenant. The new key nullifies the existing key and can operated lock without the need of replacing cylinders.

Working parts of lock

  1. Tumb-Turn = On the side of door equipped with cylinder lock, connected to lock cam. Operates deadbolt.
  2. Knob = Serves as handle, operates latchbolt.
  3. Front = This is the surface of the mortice lock case which appears at the cut end of the doors. It includes openings for latch bolt and deadbolt as well as holes for screws which secure it.
  4. Deadbolt = A lock bolt which is activated by key or thumb-turn, is square on all edges, and has no spring behind it.
  5. Latchbolt = That part of a lock which, because of a spring device behind it, slide in and then springs out to holt a door in position when it is closed.
  6. Strike = The plate recessed into the door jamb, into which deadbolt or latchbolt fits when the door is closed or locked.
  7. Case = Contains major lock components; the mortice type fits into the door and rim type is fastend to the surface of the door.
  8. Cylinder = A removable unit on high-grade lock which contains the thumblers and receives only the correct key, which when turned operates the lock.
  9. Backset = Horizontal distance from front surface of lock to the center of knob or cylinder.
  10. Spacing = Vertical distance between the center of cylinder and the cylinder of knob